Netopia 2200 - Manual (Page 289)

289
CONFIG Commands
set security state-insp eth B option on
• Type the command to enable the router to drop fragmented packets
set security state-insp eth B deny-fragments on
3. Enabling syslog:
• Type config
• Type the command to enable syslog
set system syslog option on
• Set the IP Address of the syslog host
set system syslog host-nameip
(example: set system syslog host-nameip 10.3.1.1 )
• Enable/change the options you require
set system syslog log-facility local1
set system syslog log-violations on
set system syslog log-accepted on
set system syslog log-attempts on
4.
Set NTP parameters
• Type config
• Set the time-zone – Default is 0 or GMT
set system ntp time-zone
(example: set system ntp time-zone –8 )
• Set NTP ser ver-address if necessar y (default is 204.152.184.72)
set system ntp server-address
(example:
set system ntp server-address 204.152.184.73 )
• Set alternate ser ver address
set system ntp alt-server-address
5. Type the command to save the configuration
• Type save
• Exit the configuration inter face by typing
exit
• Restar t the router by typing
restart
The router will reboot with the new configuration in effect.