Netopia 2200 User Manual

Page 109

109

Configure

For Netopia VGx technology models, separate Ethernet switch por ts are displayed and
may be configured.

To enable any of them on this VLAN, select one, and click the

Add

button.

Typically you will choose a physical por t, such as an Ethernet por t (example:

ethernet1)

or a wireless SSID (example:

ssid1), and make the port routable by specifying lan-

uplink.

•

When you are finished, click the Aler t icon in the upper right-hand corner of the screen,

and in the resulting screen, click the

Save

link.

•

If you want to create more VLANs, click the

Advanced

link (in the left-hand toolbar)

and then the

VLAN

link in the resulting page, and repeat the process.

•

When you are finished, click the Aler t icon in the upper right-hand corner of the screen,

and in the resulting screen, click the

Save and Restart

link.

☛

Note:

To make a set of VLANs non-routable, the

lan-uplink port must be included in

at least one VLAN. It must then be excluded from any VLANs that are non-
routable.