Netopia 2200 - Manual (Page 281)

281
CONFIG Commands
set security pkt-filter filterset filterset-name [ in | out ] index
src-port value
Specifies the source IP por t to match packets (the por t on the sending host that originated
the packet, if the underlying protocol is TCP or UDP).
set security pkt-filter filterset filterset-name [ in | out ] index
dst-port value
Specifies the destination IP por t to match packets (the por t on the receiving host that the
packet is destined for, if the underlying protocol is TCP or UDP).
set security pkt-filter interface
assigned-filterset filterset-name
Associates a filterset with a LAN or WAN inter face.
Example:
set security pkt-filter ethernet A assigned-filterset set1
le Less than or equal to
eq Equal to
ge Greater than or equal to
gt Greater than
Operator Action