Netopia Firmware 4000-Series User Manual
Page 98
3-32 Firmware User Guide
Enter your ISP-supplied values as shown below.
Select NEXT SCREEN and press Return.
Your IP values are shown here.
Then navigate to the Network Address Translation (NAT) screen.
Connection Profile 1: Easy Setup Profile
Connection Profile Name: Easy Setup Profile
Address Translation Enabled: Yes
IP Addressing... Numbered
Local WAN IP Address: 206.1.1.6
Local WAN IP Mask: 255.255.255.248
PREVIOUS SCREEN NEXT SCREEN
Enter a subnet mask in decimal and dot form (xxx.xxx.xxx.xxx).
Enter basic information about your WAN connection with this screen.
IP Easy Setup
Ethernet IP Address: 192.168.1.1
Ethernet Subnet Mask: 255.255.255.0
Domain Name: ISP.net
Primary Domain Name Server: 173.166.101.1
Secondary Domain Name Server: 173.166.102.1
Default IP Gateway: 206.1.1.254
IP Address Serving: On
Number of Client IP Addresses: 20
1st Client Address: 192.168.1.2
PREVIOUS SCREEN NEXT SCREEN
Set up the basic IP attributes of your Netopia in this screen.
Main
Menu
System
Configuration
IP
Setup
Network Address
Translation (NAT)