Netopia Firmware 4000-Series - Manual (Page 192)

7-4 Firmware User Guide
■ The default mode is Console Only. This is the normal state for using a terminal emulation application to
manage the router. See
“Connecting a Console Cable to your Equipment” on page 1-5 .
If you select Modem/Auto from the pull-down menu, the router becomes capable of auto detecting the
presence of a modem or a console connection attached to the serial console por t.
■ A console connection is detected at the connection speed defined on the Console Configuration menu
(see
“Console Configuration” on page 2-43 ).
■ A modem will be detected at the data rate you specify in the following menu. It will not auto detect the
Console baud rate in Modem/Auto mode.
Serial Port Configuration
+--------------+
+--------------+
Serial Port Mode... | Console Only |
| Modem/Auto |
+--------------+
Serial Port Configuration
Serial Port Mode... Modem/Auto
Data Rate (kbps)... 57600
Serial Modem Init String: AT&F&C1&D2E0S0=1
Serial Modem Directory Number: