Netopia Firmware 4000-Series - Manual (Page 246)

10-22 Firmware User Guide
Port number comparisons
A filter can also use a comparison option to evaluate a packet’s source or destination por t number. The
comparison options are:
No Compare: No comparison of the por t number specified in the filter with the packet’s por t number.
Not Equal To: For the filter to match, the packet’s por t number cannot equal the por t number specified in the
filter.
Less Than: For the filter to match, the packet’s por t number must be less than the por t number specified in the
filter.
Less Than or Equal: For the filter to match, the packet’s por t number must be less than or equal to the por t
number specified in the filter.
Equal: For the filter to match, the packet’s por t number must equal the por t number specified in the filter.
Greater Than: For the filter to match, the packet’s por t number must be greater than the por t number specified
in the filter.
Greater Than or Equal: For the filter to match, the packet’s por t number must be greater than or equal to the
por t number specified in the filter.
Other filter attributes
There are three other attributes to each filter:
■ The filter’s order (i.e., priority) in the filter set
■ Whether the filter is currently active
■ Whether the filter is set to for ward packets or to block (discard) packets