Netopia Firmware 4000-Series - Manual (Page 39)

WAN and System Configuration 2-21
Choosing Show/Change Circuit (or Delete Circuit) displays a pop-up menu that allows you to select the circuit
to be modified or deleted.
Changing a circuit
If you want to make any changes to the circuit you select, you make them in the Change Circuit screen.
■ Circuit Name allows you to associate a one- to four teen-character name with the circuit. The default circuit
name is “Circuit ”, where is some number between one and eight corresponding to the circuit’s
position in the list of up to eight circuits.
ATM Circuits Configuration
+--Circuit Name----VPI/VCI--+
+---------------------------+
Show/Change Circuit... | Circuit 1 8/35 |
Add Circuit... | Voice Circuit 0/0 |
Delete Circuit... | |
| |
| |
| |
| |
| |
+---------------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
Change Circuit
Circuit Name: Circuit 1
Circuit Enabled: +---------+
+---------+
Traffic Type... | Voice |
| Data |
Circuit VPI (0-255): +---------+
Circuit VCI (0-65535): 38
Connection Profile is Easy Setup Profile