Netopia Firmware 4000-Series - Manual (Page 140)

5-10 Firmware User Guide
Note: The Change Connection Profile screen will offer different options, depending on the model of router you
are using. For a router with the Dial Backup feature, you can associate an IPsec profile with the Primar y, the
Backup, or choose to apply it to Any Por t of the WAN inter face by choosing the inter face from the Inter face
Group pop-up menu as shown below.
From the Encapsulation Type pop-up menu, select IPsec. Then select Encapsulation Options and press Return.
The IPsec Tunnel Options screen appears.
Add Connection Profile
Profile Name: Profile 1
Profile Enabled: Yes
Encapsulation Type... IPsec
Encapsulation Options...
IP Profile Parameters...
+--------------+
+--------------+
Interface Group... | Primary |
| Backup |
| Any Port |
+--------------+
COMMIT CANCEL
IPsec Tunnel Options
Key Management... IKE
IKE Phase 1 Profile...
Encapsulation... ESP
ESP Encryption Transform... DES
ESP Authentication Transform... HMAC-MD5-96
Advanced IPsec Options...
COMMIT CANCEL