Netopia Firmware 4000-Series - Manual (Page 230)

10-6 Firmware User Guide
■ Select RADIUS Access Privileges, and from the pull-down menu, choose which access privilege you want
this user to have: All, LAN, WAN, or for IADs only, VOX.
If you assign any of these privileges, limited users will have full access to privileges associated with these
inter faces. You can customize these privileges fur ther, in order to limit access to only cer tain por tions of
those inter faces’ configuration, by selecting Custom. If you select Custom, the Access Privileges
(Custom) screen appears.
Since authentication via RADIUS ser ver is, by definition, authentication of remote users, the WAN-related
defaults are preset to Yes. Toggle any that should be changed.
Advanced Security Options
Security Databases... Local only
RADIUS Server Addr/Name:
RADIUS Server Secret:
Alt RADIUS Server Addr/Name:
Alt RADIUS Server Secret:
RADIUS Identifer: +-----------+
RADIUS Server Authentication Port+-----------+
RADIUS Access Privileges... | All |
| LAN |
| WAN |
Telnet Server Port: | VOX |
| Custom... |
+-----------+
LAN (Ethernet) IP Filter Set...
Remove Filter Set
Access Privileges (Custom)
WAN Data Configuration: Yes
Connection Profile Configuration: Yes
Circuit (PVC/DLCI) Configuration: Yes
LAN Data Configuration: Yes
LAN Subnet Configuration: Yes
NAT/Filters Configuration: Yes
Preferences (Global) Configuration:Yes
OK CANCEL
Return/Enter accepts * Tab toggles * ESC cancels.