Netopia Firmware 4000-Series User Manual

Page 78

Text mode
Original mode

3-12 Firmware User Guide

mapping and press Return.

If none of your preconfigured ranges are suitable for this mapping, you can select <> and
create a new range. If you choose <>, the Add NAT Public Range screen displays and you
can create a new public range to be used by this map. See

Add NAT Public Range on page 3-9

■

The Add NAT Map screen now displays the range you have assigned.

■

Select ADD NAT MAP and press Return. Your mapping is added to your map list.

Add NAT Map ("my_map")

First Private Address: 192.168.1.1

Last Private Address: 192.168.1.254

Use NAT Public Range... my_first_range

Public Range Type is: pat
Public Range Start Address is: 206.1.1.6

ADD NAT MAP CANCEL