Nortel Networks 8300 - Manual (Page 33)

33
SFP specifications
This section provides technical specifications for the supported small form
factor pluggable (SFP) models. Use this information to aid in proper network
design.
The specifications given in this section meet or exceed those specified in
the applicable IEEE standards, where they exist.
In these specifications, unless otherwise noted, receiver sensitivity is
defined as the minimum average input optical power for which the receiver
is guaranteed to meet the bit error rate (BER) of 10
-12 .
Navigation
• "SFP labels" (page 33)
• "General SFP specifications" (page 34)
• "1000BASE-T SFP specifications" (page 34)
• "1000BASE-SX (LC) SFP specifications" (page 35)
• "1000BASE-SX (MT-RJ) SFP specifications" (page 36)
• "1000BASE-LX SFP specifications" (page 36)
• "1000BASE-XD CWDM SFP specifications" (page 37)
• "1000BASE-ZX CWDM SFP specifications" (page 38)
• "1000BASE-BX DDI SFP specifications" (page 38)
SFP labels
The Nortel label on a typical SFP contains a Nortel serial number, a bar
code, a manufacturer’s code, an interface type, and a part number.
Nortel Ethernet Routing Switch 8300
Installation — SFPs and XFPs
NN46200-307 01.04 Standard
4.0 14 February 2008
Copyright © 2008, Nortel Networks
.