Nortel Networks 8300 User Manual

Page 25

Removing an SFP

Procedure steps

Step

Action

Disconnect the network fiber cable from the SFP connector.

Affix dust covers over the fiber optic bore and connector.

Depending on your SFP model, to release the SFP, press the
locking/extractor mechanism.

Your SFP locking/extractor mechanism can be different than the
models shown.

Slide the SFP out of the module SFP slot.

If the SFP does not slide easily from the module slot, use a gentle
side-to-side rocking motion while firmly pulling the SFP from the slot.

Store the SFP in a safe place until needed.

ATTENTION

If you discard the SFP, be sure to dispose of it according to all national
laws and regulations.

—End—

Nortel Ethernet Routing Switch 8300

Installation — SFPs and XFPs

NN46200-307

01.04

Standard

4.0

14 February 2008