Nortel Networks CALLPILOT 555-7101-217 - Manual (Page 58)

Installing the server and connecting the peripheral devices Standard 1.0
58 CallPilot
What’s next?
Continue with “Connecting peripherals to the server” on page 59.
6 OFF OFF Carrier Detect (CD) override
„ OFF: The modem sends a CD signal when it
connects with another modem; it drops the
CD on disconnect.
„ ON: CD is always ON (override).
7 OFF OFF Power-on and ATZ reset software defaults
„ OFF: Loads Y or Y1 configuration from
user-defined non-volatile memory
(NVRAM).
„ ON: Loads &F0-Generic template from
read-only memory (ROM).
8 ON ON AT command set recognition
„ OFF: Disables command recognition (dumb
mode).
„ ON: Enables recognition (smart mode).
DIP
switch Default
setting Change
to
Function