Nortel Networks CALLPILOT 555-7101-217 - Manual (Page 56)

Installing the server and connecting the peripheral devices Standard 1.0
56 CallPilot
Modem DIP switches
Set the modem DIP switches before you connect the modem to the CallPilot
server.
Note: This section applies only to the US Robotics 33.6 or 56 Kbps external
Sportster modem. If your modem is different, refer to the documentation for
your modem.
The following diagram shows the key components of the external modem,
including the location and required settings of the DIP switches:
G101445
RJ-11
connection DIP
switches
Switch positions:
Serial cable
(RS-232)
connection Power
connection
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
OFF
ON