View system information – Nortel Networks 2210 User Manual
Page 52
52
User Option menu
indicates the selected setting):
•
Disable — This is the default.
•
5 seconds
•
10 seconds
•
20 seconds
7.
Press the
Select
button (or the
OK
soft
key).
8.
Do one of the following:
•
Press the
Up
soft key to return to the
previous menu and choose another
option.
•
Press the
Power Off/End Call
key
to exit all menus and return to the
standby state.
View system information
The System Information option displays the following:
• Phone IP Address — displays the Internet Protocol (IP) address assigned to the
handset.
• Server IP Address — displays the Server IP address.
• Firmware Version — displays the software version running on the handset.
Note: The information in the System Information option is for display purposes only.
You cannot edit this information.
To view the handset IP address:
1.
Press and hold the
Function
key when
in the standby state.
2.
Use the
Up
and
Down
buttons to scroll
through the menu and highlight
System Information
.
3.
Press the
Select
button (or the
OK
soft
key) to select the setting.
4.
Use the
Up
and
Down
buttons to scroll
through the menu and highlight
Up
System Information
Phone IP Addr