Nortel Networks 2210 - Manual (Page 105)

105
Dual Charger
on. If the LED starts blinking as soon as
the battery pack is inserted, remove the
battery pack and reinsert it into the
charger.
If the LED continuously blinks during
the charging process, the battery pack is
unusable. Properly dispose of the
unusable battery pack.
3. When charging is complete, the LED
turns off. Remove the battery pack from
the charger.
Clean the Dual Charger
Clean the Dual Charger by wiping the surface with a plain-water-dampened cloth or
paper towel. A mild detergent solution can be used. Be sure to wipe away any
detergent residue with a plain-water-dampened cloth.
The battery pack contacts on the handset can be cleaned with isopropyl (rubbing)
alcohol applied with a cotton swab, cloth, or paper towel. Do not push or pull the
exposed battery pack contacts.
CAUTION
Do not immerse the charger in water or other liquid.
Do not pour liquids into the charger slot.