Function menu items – Nortel Networks 2210 User Manual

Page 22

Your WLAN Handset 2210

Function menu items

Your WLAN Handset 2210 has six non-programmable Function menu items. Table 3
lists these menu items and their corresponding functions and descriptions. To activate
the functions on your WLAN Handset 2210, press the

Function

key – in the active

(on-hook) or active (off-hook) states – and the appropriate number on the keypad, or
use the

and

Down

buttons on the side of the handset to scroll through the

functions and the

Select

button to select and activate a function.

Active
(on-hook)

This state is entered when the handset is in standby state and the
user presses the

Menu

key. The handset appears to be on-hook

from the Call Server point of view, and loud ringing will occur
(when required). The handset display is active and the

Menu

FCN

Line

menus can be accessed. The user returns to the

standby state by pressing the

Power Off/End Call

key. If no keys

are pressed for a period of 10 seconds, the state times out and the
handset returns to the standby state. Pressing the

Power Off/End

Call

key in any of the menus will exit the menu. Pressing the

Power Off/End Call

key again will return the handset to Standby

state.

Note: If the user selects any menu item or presses a soft key, the handset changes
into the active (off-hook) state, the timeout condition is removed and handset will
use a soft ring.

Error

The handset enters the error state when it loses the signal from the
access point. If the handset regains the signal within
approximately 20 seconds, it returns to the state it just left. If the
handset is out of range for longer than 20 seconds, the handset
restarts and returns to the standby state.

Active call

The handset enters the active call state when a user is in an active
conversation. To enter this state, the user either makes a call or
answers an incoming call. While in this state, the handset will use
a soft ring to alert the user to another call. The user leaves this
state when the call is completed by pressing the

Power Off/End Call

key or if an incoming call is ended before

the user answers it.

Table 2
The WLAN Handset 2210 states (Part 2 of 2)

State

Description