Step-by-step configuration – NETGEAR ADSL Firewall Router DG834 User Manual
Page 202
Reference Manual for the ADSL Firewall Router DG834
E-2
NETGEAR VPN Configuration
202-10005-05, June 2005
Figure E-1: Addressing and Subnet Used for Examples
Step-By-Step Configuration
1.
Configure the DG834 as in the Gateway-to-Gateway procedures using the VPN Wizard (see
“How to Set Up a Gateway-to-Gateway VPN Configuration“ on page 7-20
), being certain to
use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows.
•
DG834
WAN IP = 14.15.16.17
LAN IP = 10.5.6.1
LAN Subnet Mask = 255.255.255.0
•
FVL328
WAN IP = 22.23.24.25
LAN IP = 172.23.9.1
LAN Subnet Mask = 255.255.255.0
a.
In Step 1, enter toFVL328 for the Connection Name.
b.
In Step 2, enter 22.23.24.25 for the remote WAN's IP address.
a.
In Step 3, enter the following:
•
IP Address = 172.23.9.1
•
Subnet Mask = 255.255.255.0
Note: Product updates are available on the NETGEAR, Inc. web site at
.
Gateway A
22.23.24.25
14.15.16.17
10.5.6.0/24
172.23.9.0/24
172.23.9.1
10.5.6.1
WAN IP
WAN IP
LAN IP
LAN IP
Gateway B
VPNC Example
Network Interface Addressing
DG834
FVL328