NEC Dterm PSIII - Manual (Page 53)

47
♦ Press the FNC key to confirm. For Mode 2*
systems, PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
R ESET A LL
Primarily a maintenance function. Resets all settings
to what they were when the handset left the factory.
Functions Default Setting
Call Volume Standard
Vibration Off
Service ALM On
CONF. Tone On
Key Click On
Key Light On
LED Flash On
Soft Key Delete all registered data
VM Number Delete all registered data
MSG Storage - - -
Protect TMM Off
TM Reminder Off
Default Set
Complete
Ring Volume Standard
Speaker Ring On
STN Ring Pattern 1
Trunk Ring Pattern 2
CFW Busy Delete all registered data
CFW D/A Delete all registered data
CFW All Delete all registered data
CFW N/R Delete all registered data
Destination Delete all registered data
Time Display On
Name Entry Delete all registered data
Headset Ring Auto
Auto Answer Setting: Off, Registered time: Brank
Answer Tone On
Password Settig: Off, Password: 0000
Protect DIR Off
Phone Book Delete all registered data for Direc-
tory, Speed Dial
TM Review Delete revieved TM message
Courtesy mode Off
LNR Deleted
CPN Deleted
Functions Default Setting