NEC Dterm PSIII - Manual (Page 22)

16
♦ When the name is complete, press the FNC key.
PSIII displays:
♦ Key in the number. If pause is required, (e.g.; after
entering 9 to gain access to an outside line) press
“HOLD” to insert a pause.
♦ Press the FNC key to enter.
♦ Press FNC again to confirm.
♦ After the registration is completed, setting tone
will ring.
♦ After two seconds, return to the Directory Menu
page.
NOTE: Do not remove the battery until at least
one minute has elapsed since entering Directory
or Speed Dial entries.
T O E NTER S PEED D IAL N UMBERS
♦ Press the FNC key→1→2. PSIII displays:
♦ Select [1] Add, then press the FNC key or 1. PSIII
displays:
♦ Select “No Entry” Number.
♦ Press the FNC key and register speed dial numbers
from [0] to [9]. PSIII displays:
♦ Key in the name using the character chart on the
previous page.
Add Digits?
Speed Dial
[1]Add
[2]Edit
[3]Delete
[0]No Entry
[1]No Entry
[2]No Entry
[3]No Entry
Add Name?