NEC Dterm PSIII - Manual (Page 52)

46
♦ Key in password.
♦ Press the FNC key to confirm. PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
D EFAULT S ET
Allows you to reset your handset to all the factory-set
defaults:
To Invoke Default Set:
♦ Press the FNC key →3→7→6. PSIII displays:
♦ Press the FNC key or 1. For Mode 2* systems,
PSIII displays:
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
Functions Default Setting
Call Volume Standard
Vibration Off
Service ALM On
CONF. Tone On
Key Click On
Key Light On
LED Flash On
MSG Storage – – –
Protect TMM Off
TM Reminder Off
Ring Volume Standard
Speaker Ring On
STN Ring Pattern 1
Protect DIR
Reset
Trunk Ring Pattern 2
Time Display On
Headset Ring Auto
Auto Answer Off
Answer Tone On
Password Off, Password is 0000
Protect DIR Off
Courtesy Mode Off
Functions Default Setting
[1]Set
Default Set
Execute?