NEC Dterm PSIII - Manual (Page 13)

7
T O R ECEIVE A C ALL
♦ As your D term PSIII rings the Line Indication will
illuminate. PSIII displays:
NOTE: If Calling Party Number is not available,
“CALL” is displayed. If Calling Party Name is
not available then the calling party number will
appear in the display (only for Mode 2* systems).
♦ Press the L1 or L2* key (depending on what key is
lit).
♦ Begin speaking into the microphone.
NOTE: If you cannot answer a call, “Missed
Call” is displayed.
T O U SE D IRECTORY D IALING
Searching for Directory Entries Manually:
♦ While in a standby state, press the Scroll S
key.
PSIII displays:
♦ To search the Directory in alphabetical order, press
the Scroll
T
key.
♦ You may press the Scroll S key to scan in reverse
order.
♦ When you found the name you are looking for,
press L1 or L2* to dial the number.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
95551212
L 1
C.Cross
95551212
L 1
Mode 1 Mode 2*
Directory