NEC Dterm PSIII - Manual (Page 48)

42
♦ After two seconds, return to the standby state.
PSIII displays:
♦ Key entry will not use.
To Turn Off Automatic Answer:
♦ Press the FNC key →3→7→2. PSIII displays:
♦ Select L1 or L2 by using the Scroll S
or Scroll
T
keys. For Mode 2* systems, PSIII displays:
♦ Select [2] Off, then press the FNC key or 2. PSIII
displays:
♦ Press the FNC key to enter. PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
A NSWER T ONE
Enables you to hear a warning tone for an incoming
call before Auto Answer.
J. KRAUSER
L2:90000
L1:12345
Auto Answer
[1]L1
[2]L2
Auto Answer
[1]On
[2]Off
Auto Answer
Reset?
Auto Answer
Reset