NEC Dterm PSIII - Manual (Page 23)

17
♦ Press the FNC key to enter name. PSIII displays:
♦ Key in the digits for that number.
♦ Press the FNC key to enter digits.
♦ Press the FNC key again to confirm.
♦ After the registration is completed, setting tone
will ring.
♦ After two seconds, return to the Directory Menu
page.
NOTE: Do not remove the battery until at least
one minute has elapsed since entering Directory
or Speed Dial entries.
T O A CCESS VM (V OICE M AIL )
NOTE: This function depends on the external
Voice Mail Server.
♦ When receiving VM. PSIII automatically displays:
(or pressing the FNC key
→2)
NOTE: When receiving VM and TM, PSIII
displays both “VMM” and “TMM”.
♦ Select [1] VM Access, then press the FNC key or
1. PS III displays:
♦ Press L1 or L2* to dial the number.
♦ Operate according to audio assist to receive VM.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
Add Digits?
[1]VM Access
[2]TM Review
VMM
MSG Services
VM Access
38000