NEC Dterm PSIII - Manual (Page 49)

43
To Turn On Answer Tone:
♦ Press the FNC key →3→7→3. PSIII displays:
♦ Select [1] On, then press the FNC key or 1 to turn
on Answer Tone for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Turn Off Answer Tone:
♦ Press the FNC key →3→7→3. PSIII displays:
♦ Select [2] Off, then press the FNC key or 2 to turn
off Answer Tone for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
P ASSWORD
Enables you to set a password. Passwords are 4
characters long. The default password is 0000.
To Set Password:
♦ Press the FNC key →3→7→4. PSIII displays:
♦ Press the FNC key or 1. For Mode 2* systems,
PSIII displays:
♦ Key in old password.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
[1]On
[2]Off
Answer Tone
[1]On
[2]Off
Answer Tone
[1]Set
[2]Reset
Password
Old Password?