NEC Dterm PSIII - Manual (Page 50)

44
♦ Press the FNC key to confirm old password. PSIII
displays:
♦ Key in password.
♦ Press the FNC key to enter the password.
♦ Key in password twice.
♦ Press the FNC key to confirm. PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Cancel the Password:
♦ Press the FNC key →3→7→4. PSIII displays:
♦ Press the FNC key or 2. For Mode 2* systems,
PSIII displays:
♦ Key in current password.
♦ Press the FNC key to confirm. PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
NOTE: The Password has now been reset to:
0000.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
New Password?
New Password
Set
[1]Set
[2]Reset
Password
Password?
Password
Reset