NEC Dterm PSIII - Manual (Page 16)

10
T O T RANSFER A C ALL
While you are speaking on the phone, the PSIII will
display:
NOTE: If Calling Party Name is not available then the calling
party number will appear in the display for Mode 2* systems.
♦ If you wish to transfer this call, press TRF key.
♦ You will now hear a special dial tone. Key in the
telephone number you wish to transfer the call to.
♦ Press END/PWR to complete the transfer. Your
PSIII will return to the standby state.
T O P LACE A C ALL O N -H OLD
(Mode 2* System Only)
While you are speaking on the phone, the PSIII will
display:
NOTE: If Calling Party Name is not available
then the calling party number will appear in the
display.
♦ Press HOLD to place call on-hold.
♦ Press L1 or L2* again to retrieve the call from
hold.
T O U SE C OURTESY M ODE
Courtesy mode enables a PSIII incoming call to
become silent and vibration.
To Enable Courtesy Mode:
♦ Press CLEAR key and hold it down for more than
two seconds. For Mode 2* systems, PSIII
displays:
To Disable Courtesy Mode:
♦ Press CLEAR key and hold it down for more than
two seconds.
NOTE: If DEFAULT SET or RESET ALL is invoked,
Courtesy Mode will be disabled.
95551212
L 1
C.Cross
95551212
L 1
Mode 1 Mode 2*
C.Cross
95551212
L 1
J. KRAUSER
L2:90000
L1:12345