Loading paper onto tray 2, Loading paper onto tray 2 -5 – NEC PAGEWORKS 8E User Manual

Page 65

Text mode
Original mode

3-5

Loading Paper

Using the Printer

Chap

r 3

Loading Paper onto Tray 2

Note

Slide Tray 2 out of the second paper cassette unit as illustrated.

Note

• Make sure that the Tray 2 cassette for the proper size of paper to be used

for printing has been installed into the second paper cassette unit. For
instructions on inserting (and removing) the Tray 2 cassette into (and
from) the second paper cassette unit, refer to Chapter 2.

• The cassette is designed to remain in the unit during the normal loading

and operation of the printer. To remove Tray 2 from the unit, pull it out
as far as it will go without force. Then gently raise the forward-end up,
and remove Tray 2 from the unit.

PageWorks.book Page 5 Tuesday, April 21, 1998 3:55 PM