NEC PAGEWORKS 8E - Manual (Page 228)

7-10
Print Quality Problems
Tr
oub
lesho
o
ting
Ch
apter
7
Printout too light
• The toner density setting of the
printer driver may be “Save
toner”.
Change the setting and try print-
ing again.
• The toner cartridge may be run-
ning out of toner.
Remove the toner cartridge and
rock it left and right a few times
to distribute remaining toner.
If the problem persists, replace
the toner cartridge (page 6-1).
• The toner cartridge may be
defective.
Remove the toner cartridge and
check it for damage. Replace the
toner cartridge if necessary
(page 6-1).
Printout too dark
• The toner cartridge may be
defective.
Remove the toner cartridge and
check it for damage. Replace the
toner cartridge if necessary
(page 6-1).
PageWorks.book Page 10 Tuesday, April 21, 1998 3:55 PM