NEC PAGEWORKS 8E - Manual (Page 162)

4-88
DOS Printing Utilities
Printer Driver
Chap
te
r 4
To remove the Status Display from memory
Type the following at the DOS prompt:
Rep /d
Note
Accessing the Printer Control Panel
This section explains how to access the Printer Control Panel.
To access the Printer Control Panel
Type the following at the DOS prompt to access the Printer Control
Panel:
1. Change to the directory you created under “Installing DOS Print-
ing Utilities” on page 4-86.
Type:
cd c:\mltdos
↵
• If you used the directory name we showed in our installation
example, type in the command exactly as shown above. If you
used a different directory name, change mltdos to the name you
used.
2. Type the following command at the DOS prompt.
Type:
spcpdos
↵
• You should use the above step to remove the Status Display from mem-
ory if the Status Display is interfering with one of your other software
applications or if you need to free up the memory used by the Status
Display.
PageWorks.book Page 88 Tuesday, April 21, 1998 3:55 PM