Polycom 1 - Manual (Page 12)

Administrator’s Guide for Polycom HDX Systems
1 - 2
Positioning the System
Position the system so that the camera does not face toward a window or other
source of bright light. Place the camera and display together so that people at
your site face the camera when they face the far site display.
Polycom HDX systems are designed to be placed on a tabletop or in an
equipment rack.
To position the system:
1. Install the mounting brackets on the system if you need to mount it in an
equipment rack, or install the self-adhesive feet if you will place the
system on a table or shelf.
2. Place the system in the desired location. Leave enough space to work, so
that you can connect the cables easily.
Powering On and Off
Connect power and power on the system after you have connected all of the
equipment that you will use with it.
To power on the Polycom HDX system:
¾ Press the power button on the remote control.
¾ Press the power switch on the front of the system.
The Polycom splash screen is displayed within about 10 seconds.