Printronix P7000 H-Series - Manual (Page 76)

76
Chapter 3 Configuring The KSSM Emulation With Control Codes
Turn Auto-wrap Around On/Off
ASCII Code ESC d n
Hex Code 1B 64 n
Dec Code 27 100 n
Purpose Turns Auto-wrap Around on/off according to the following
values:
n = 0 Turn off Auto-wrap Around. The characters beyond right
margin will be cut.
n = 1 Turn on Auto-wrap Around. The characters beyond right
margin will be printed on the next line.
Where:
n = 0, 1
Turn Double-Height Printing On/Off
ASCII Code ESC w n
Hex Code 1B 77 n
Dec Code 27 119 n
Purpose Turns on/off double-height printing of all characters, as
measured from the current baseline:
n = 1 or 49Turns on double-height
n = 0 or 48Turns off double-height
Where:
n = 0, 1, 48, 49
Comment No change for line spacing.
This command only takes effect in SBCS mode.
The default is Normal (non double-height) printing.