Printronix P7000 H-Series - Manual (Page 35)

Cancel The Alignment of SBCS Character With
35
Cancel The Alignment of SBCS Character With DBCS
Character
ASCII Code FS V
Hex Code 28 86
Dec Code 1C 86
Purpose Cancels the spacing adjustment of SBCS characters to fit the
space normally occupied by a full-width DBCS character.
Comment This command cancels the effect of the FS U command.
This command makes the FS T command affect the spacing of
the SBCS character.
In the default mode, the SBCS character aligns with the DBCS
character.
Backspace
ASCII Code BS
Hex Code 08
Dec Code 8
Purpose Moves the print position to the left a distance equal to one
character in the current pitch plus any additional intercharacter
space.
Comment The printer ignores this command if the command would move
the print position to the left of the left margin.
In DBCS mode, the command takes effect in double byte
character setting.