Printronix P7000 H-Series - Manual (Page 46)

46
Chapter 3 Configuring The KSSM Emulation With Control Codes
Line Feed
ASCII Code LF
Hex Code 0A
Dec Code 10
Purpose Advances the vertical print position one line (in the currently set
line spacing).
The LF command cancels one-line double-width printing
selected with the SO, ESC SO, or FS SO commands.
Comment The user can define LF = LF or LF = CR + LF from the front
panel.
If LF = CR + LF, the printer moves the horizontal print position
to the left-margin position.
If the LF command moves the print position below the bottom
margin on continuous paper, the printer advances to the top-of-
form position on the next page.