Select bold font, Cancel bold font, Select character style – Printronix P7000 H-Series User Manual
Page 56

56
Chapter
3
Configuring The KSSM Emulation With Control Codes
Select Bold Font
ASCII Code ESC E
Hex Code
1B 45
Dec Code 27
69
Purpose
Sets the weight attribute of the font to Bold.
Comment
This command increases the weight of printed lines and
characters, resulting in bolder printing.
This command affects “Bold Print” on the front panel.
The default is Normal (non-bold) print.
Cancel Bold Font
ASCII Code ESC F
Hex Code
1B 46
Dec Code 27
70
Purpose
Sets the font to Normal (cancels the bold print previously set
with the ESC E command).
Comment
This command affects “Bold Print” on the front panel.
The default is Normal (non-bold) print.
Select Character Style
ASCII Code ESC q
n
Hex Code
1B 71
n
Dec Code 27
113
n
Purpose
Turns on/off outline and shadow printing, according to the
parameters below:
n = 0 Turns off outline/shadow printing
n = 1Turns on outline printing
n = 2Turns on shadow printing
n = 3Turns on outline and shadow printing
Where:
0 <=
n <= 3
Comment
This command does not affect graphics characters.