Printronix P7000 H-Series - Manual (Page 38)

38
Chapter 3 Configuring The KSSM Emulation With Control Codes
Where:
P = activates printable data field variable
Where:
p = location of PDF ('A' (above), 'B' (below, default), 'N' (none))
(Note: FIM, Postbar, and PDF417 do not support this
parameter.)
Where:
C = Calculate and plot check digit (if available as an option, the
default is No).
Check digit if the check digit is allowed to be optional)
Where:
H = activates the height variable
Where:
hh = 2-digit barcode height in 1/10"
Where:
D = Dark barcode
(Note: This parameter does not take any effect under DBCS
typefaces.)
Barcode Type Magnification
Code 39
Interleaved 2/5
German I-2/5
UPC Shipping
Telepen
MSI
Code 128
UCC/ EAN-128
Code 93
UPS 11
UPC-A
UPC-E
EAN 8
EAN 13
Codabar
Postnet
Royal Mail
Postbar
FIM
PDF417
X4 X3 X2 X1 X1.5 X1A X1B *X1C *X1D *X1E
X4 X3 X2 X2A X1 X1A X1B
X4 X3 X2 X2A X1 X1A X1B
X4 X3 X2 X2A X1 X1A X1B
X4 X3 X2 X1 X1.5 X1A X1B *X1C *X1D *X1E
X4 X3 X2 X1
X4 X3 X2 X1 X1.5
X4 X3 X2 X1 X1.5
X4 X3 X2 X1 X1.5
X4 X3 X2 X1 X1.5
X2 X1
X2 X1
X2 X1
X2 X1
X4 X3 X2 X1
X1
X1 X1A
X1 X1A
X1
X3 X2 X1
*Note: the X1C, X1D, and X1E values can only be printed for horizontal
180dpi barcodes. If these values are sent for horizontal 120dpi barcodes,
they will print as value X1.