Polycom 1725-31402-001 - Manual (Page 96)

Release Notes - UC Software Changes
Page 88 Copyright © 2011 Polycom, Inc.

47531: Using a BLF or Speed Dial key for a Conference operation does not
work.

47537:
If call.stickyAutoLineSeize=”1”, initiating a second call whilst a first call
is in the “Outgoing Proceeding” State will result in two calls in the Proceeding
state

47681: BLF: Attendant may not be able to perform directed call pick up on a
monitored line if using a shared line.

47705: When a phone holds a call, press headset button->EndCall sk->NewCall
sk, the phone does not switch back to hands free mode

47716: Config call.stickyAutoLineSeize="1", phone does not seize correct line
key when dialing from Call List or Contact Directory

47728: SoundPoint IP 601: Attendant does not display incoming call
appearance and does not hear attendant ringing tone when a monitored line is
on the 2nd or 3rd Expansion Module

47741: When using 1, 3, 7, 5 key combo to reset flash settings, the UI has
some errors.

47866: SoundPoint IP 320/330/430/450/550/560/650/670: The phone may reboot
when hold reminder tone is enabled and a call is active on the speakerphone.

47537: If call.stickyAutoLineSeize=”1”, initiating a second call whilst a first call
is in the “Outgoing Proceeding” State will result in two calls in the Proceeding
state

47538: On-hook entered digits on a BLF attendant phone are erased if a
remote BLF phone in ringing state is answered on the remote BLF phone.

47559: In some scenarios a BLF attendant phone incorrectly plays the
attendant ringing tone.