Polycom 1725-31402-001 - Manual (Page 31)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 23

62453: Phone displays ghost call appearance labeled 'Unknown Party' if
remote party is held while reorder tone is played locally.

62490:
Enabling the “Screen capture” function with httpd.enabled="0" causes
the phone to freeze and reboot.

62576: The phone does not reboot in order to pick up new “sip.ld” file after an
“Update Configuration” is invoked from the menu.

62642: The phone plays dial tone and RTP media when resuming on a call held
at another phone.

62704: BLA presence does not recover properly on the monitoring phone
when the LAN cable is disconnected and then re-connected.

62906: Phones do not correctly provision using the HTTPS protocol option
when using a server certificate with an older MD2 digest message algorithm.

63076: Phones with BLA lines are not able to establish more than 10 outgoing
calls.

63214: Phone will reboot if it receives more REFERs that
“reg.x.callsPerLineKey” is configured for.
2.3.4 Configuration Parameter Changes
The following table only lists the changes in Configuration Parameters when compared to
UCS 3.3.0.
The configuration files, their respective parameters and defaults, as well as the provisioning
methods have been simplified but extensively modified starting from UCS 3.3.0.
Before installing the software, it is highly recommended that you first familiarize yourself
with the changes outlined in the “Administrator‟s Guide for the Polycom® UC Software –
3.3.0” and Technical Bulletin 60519 “Simplified Configuration Improvements in Polycom®
UC Software 3.3.0”.
See Section 0 for details on how to access these documents.
Configuration Parameter Action
attendant.resourceList.x.callAddress added
attendant.resourceList.x.proceedingIsRecipient added
device.cma.disableTlsForDebug added
device.cma.disableTlsForDebug.set added
dir.H350.dev.bindOnInit added
dir.H350.group.bindOnInit added
dir.H350.person.bindOnInit added
dir.corp.bindOnInit added
feature.acdPremiumUnavailability.enabled added