Polycom 1725-31402-001 - Manual (Page 128)

Release Notes - UC Software Changes
Page 120 Copyright © 2011 Polycom, Inc.

37053: Add ability to make local contact directory read-only from the
phone

38328: Add check for local contact directory changes during
configuration change checks

38357: Add ability to adjust the maximum brightness of the SoundPoint
IP 550 and 650 phones.

38371: Allow for TCP keep-alive on SIP signaling TLS connections

38654: Add support for SoundPoint IP 320 Part Number 2345-12200-005
and SoundPoint IP 330 Part Number 2345-12200-004 for China market.

38888: Add ability to adjust the maximum brightness of SoundPoint IP
Backlit Expansion Modules.
2.34.2 Removed Features

38813: Remove 1000 half duplex as a valid ethernet configuration.
2.34.3 Corrections

34800: MWI Notify: Message Waiting Counts are ignored if "Messages-
Waiting" is set to "no"

35692: Functionality breaks down on pressing "conference>>cancel"
soft keys after transfer try is rejected. Phone reboots.

36566: microbrowser: Left arrow when on first field in a form makes
cursor turn invisible

36786: Changing audio modes (e.g. handsfree to handset) during call
set-up mode may not work correctly in some circumstances.

37284/37661: During a Blind Transfer the phone should terminate the
call on receipt of a 180 Ringing Response.

37313: RTP packet size incorrect when SRTP authentication turned off

37316: Authentication failing when phones have different payload size

37334: Disabling CDP from the phone menu causes an unnecessary
reboot

37709: SoundPoint IP 330/320 phones using the idle micro-browser may
re-boot after several days due to low memory.

38112: Logging message indicates that default cert bundle in use when
custom only has been selected.

38344: If URL-dialing is disabled in the configuration file, the phone
shows Number@ServerIP for caller ID (This issue occurs on SIP 2.2.0
and SIP 2.2.1 releases only).

38430: In a BLA configuration attempting to make a call on a remotely
busy shared line may cause the phone to re-boot instead of displaying