Polycom 1725-31402-001 User Manual

Page 112

Release Notes - UC Software

Changes

Page 104

sip

added

softkey.x.use.hold

If set to 0 or Null, the soft key is not
displayed in the hold state.
If set to 1, the soft key is displayed in
the hold state.

sip

added

softkey.feature.newcall

If set to 0, the New Call soft key is not
displayed when there is another way
to place a call.
If set to 1 or Null, the New Call soft
key is displayed.

sip

added

softkey.feature.endcall

If set to 0, the End Call soft key is not
displayed.
If set to 1 or Null, the EndCall soft key
is displayed.

sip

added

softkey.feature.split

If set to 0, the Split soft key is not
displayed.
If set to 1 or Null, the Split soft key is
displayed.

sip

added

softkey.feature.join

If set to 0, the Join soft key is not
displayed.
If set to 1 or Null, the Join soft key is
displayed.

sip

added

softkey.feature.forward

If set to 0, the Forward soft key is not
displayed.
If set to 1 or Null, the Forward soft
key is displayed.

sip

added

softkey.feature.directories

If set to Null, the Dir soft key is
displayed on the SoundPoint IP
320/330 phone, but not on any other
phone.
If set to 0, the Dir soft key is not
displayed on any phone.
If set to 1, the Dir soft key is displayed
on all phones as follows:
• In the idle state, it is displayed after
the New Call and Callers soft keys.
• In the dialtone state, it is displayed
after the End Call and Callers soft
keys.
• During a conference or transfer, it is
displayed after the Callers and
Cancel soft keys.

sip

added

softkey.feature.callers

If set to Null, the Callers soft key is
displayed on the SoundPoint IP
320/330 phone, but not on any other
phone.
If set to 0, the Callers soft key is not
displayed on any phone.
If set to 1, the Callers soft key is
displayed on all phones as follows:
• In the idle state, it is displayed after
the New Call soft key and before the
Dir soft key.
• In the dialtone state, it is displayed
after the End Call soft key and before
the Dir soft key.
• During a conference or transfer, it is
displayed before the Cancel soft key.