Polycom 1725-31402-001 - Manual (Page 147)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 139

16354: Inconsistent error message given when attempting to make a call
on an unregistered line using different methods when
call.enableOnNotRegistered is set to „0‟

16477: When phone is configured for NAPTR transport but server does
not contain NAPTR and SRV, the phone may do SRV lookups for A
records or A lookups for SRV records

16899: Phone can send a malformed target URI in some NOTIFY
messages in certain scenario

17179: Transfer may fail in some scenarios if the Transfer soft key is
pressed before the second party answers

17318: Phone does not update presence status (e.g. to offline) when
reboot initiated

17422: When using a bridged line, if a call is transferred to an invalid
number it cannot be retrieved

17614: Setting the phone‟s own status through "MyStat" does not work
properly

17868: Boot server password is displayed in Configuration menu if boot
server is specified as a full URL including user name and password

17911: Per-registration DND does not work on SoundPoint IP 430

17918: call.enableOnNotRegistered parameter is not working correctly

17920: Incorrect icon displayed for offline status when using peer-to-
peer presence

18078: When using an LCS server, contacts cannot be added on the
phone when the contact list is empty

18147: Expansion modules may display solid background if SoundPoint
IP 601 or 650 has maximum number of registrations configured and
maximum number of roaming buddies enabled

18198: Value of reg.x.callsPerLineKey parameter is not taken into
account when additional calls are placed using hot (static) dialing

18297: VAD/CNG Rx synthesis not working on SoundPoint IP 650

18333: Received data on any socket resets timeout of all sockets

18393: DTMF levels 3dB lower than configured level when RFC 2833
disabled

18501: Incoming call is sent to wrong line in some scenarios when the
phone has an active call and reg.x.lineKeys > 1

18688: Value of reg.1.callsPerLineKey parameter is not taken into
account when two lines are configured and reg.2.callsPerLineKey is set
to default and there is a call on hold on both lines

18772: SoundPoint IP 650 phone does not show „HD‟ animation when a
wide-band call is transferred to it