beautypg.com

Configuration file parameter changes, 4 configuration file parameter changes – Polycom 1725-31402-001 User Manual

Page 149

background image

Release Notes - UC Software

Changes

Copyright © 2011 Polycom, Inc.

Page 141

2.40.4 Configuration File Parameter Changes

.cfg
File

Action

Parameter

Description

phone1

added

reg.x.server.y.lcs

Refer to Technical Bulletin 5844.

phone1

added

dialplan.x.applyToUserSend="1"
dialplan.x.applyToUserDial="1"
dialplan.x.applyToCallListDial="0"
dialplan.x.applyToDirectoryDial="0"

Refer to Technical Bulletin 11572.

phone1

added

reg.x.server.y.transport and
reg.x.outboundProxy.transport

Added “TCPOnly” as a possible value for
these existing parameters.

phone1

changed

msg.mwi.x.callBackMode="disabled" to
msg.mwi.x.callBackMode="registration"
(for x = 2, 3, 4, 5, 6) [changed for bug
13818]

sip

added

voIpProt.server.1.lcs

Refer to Technical Bulletin 5844.

sip

added

voIpProt.SIP.useSendonlyHold

Can be set to 0 or 1. Null default is 0.
Default in sip.cfg is 1.
If set to 1, the phone will send a reinvite
with a stream mode attribute of “sendonly”
when a call is put on hold. This is the
same as the previous behavior.
If set to 0, the phone will send a reinvite
with a stream mode attribute of “inactive”
when a call is put on hold.
Note:
The phone will ignore the value of this
parameter if set to 1 when the parameter
voIpProt.SIP.useRFC2543hold
is also set to 1 (default is 0).

sip

added

dialplan.applyToUserSend="1"
dialplan.applyToUserDial="1"
dialplan.applyToCallListDial="0"
dialplan.applyToDirectoryDial="0"

Refer to Technical Bulletin 11572.

sip

changed

dialplan.digitmap.timeOut="3" to
"3|3|3|3|3|3"

Refer to Technical Bulletin 11572.

sip

changed

tcpIpApp.sntp.daylightSavings.start.mo
nth="4"

to “3”

Changes to support new daylight savings
time rules.

sip

changed

tcpIpApp.sntp.daylightSavings.start.dat
e="1"

to “8”

sip

changed

tcpIpApp.sntp.daylightSavings.stop.mon
th="10"

to “11”

sip

changed

tcpIpApp.sntp.daylightSavings.stop.day
OfWeek.lastInMonth="1"

to “0”

sip

added

call.stickyAutoLineSeize.onHookDialing

Refer to Administrator‟s Guide Addendum
for SIP 2.1.

sip

changed

voice.gain.rx.digital.chassis.IP_650="-9"
to “6”

Gain changes required to match new
software load.

sip

changed

voice.gain.rx.digital.ringer.IP_650="-21"
to “-12”

sip

changed

voice.handset.sidetone.adjust.IP_430="
-12"

to “-13”

sip

added

voIpProt.server.x.transport and
voIpProt.SIP.outboundProxy.transport

Added “TCPOnly” as a possible value for
these existing parameters.