Polycom 1725-31402-001 - Manual (Page 109)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 101
2.25.4 Configuration File Parameter Changes
.cfg File Action Parameter Description
sip added voIpProt.SIP.strictLineSeize If set to 1, forces the phone to wait for
200 OK response when receiving a
TRYING notify.
If set to 0 or Null, this is old behavior.
sip added voIpProt.SIP.strictUserValidation If set to 1, forces the phone to match
user portion of signaling exactly.
If set to 0 or Null, phone will use first
registration if the user part does not
match any registration.
sip added voIpProt.SIP.lineSeize.retries Controls the number of times the
phone will retry a notify when
attempting to seize a line (BLA).
sip added voIpProt.SIP.header.diversion.enable If set to 1, the diversion header is
displayed if received.
If set to 0 or Null, the diversion
header is not displayed.
sip added voIpProt.SIP.header.list.useFirst If set to 1 or Null, the first diversion
header is displayed.
If set to 0, the last diversion header is
displayed.
sip added voIpProt.SIP.header.warning.codes.accept A list of accepted warning codes.
If set to Null, all codes are accepted.
Only codes between 300 and 399 are
supported.
sip added voIpProt.SIP.header.warning.enable If set to 1, the warning header is
displayed if received.
If set to 0 or Null, the warning header
is not displayed.
sip added voIpProt.SIP.musicOnHold.uri A URI that provides the media stream
to play for the remote party on hold.
If reg.x.musicOnHold is set to Null,
this attribute is checked.
sip added lcl.ml.lang.tags.x The format is:
• The first two letters are the ISO-639
language abbreviation.
• The next two letters are the ISO-
3166 country code.
• The next two letters are the ISO-639
language abbreviation.
• The remainder of the string is the
preference level for the display of the
language, or English if the language
is not available
sip added up.numberFirst CID If set to 0 or Null, caller ID display will
show
caller‟s name first.
If set to 1, caller ID display will show
caller‟s number first.
sip changed saf.1 The default value is Null. To allow the
SoundPoint IP welcome sound to be
played on reboots and restarts, set to
SoundPointIPWelcome.wav
sip changed voice.aec.hs.enable The default value is enabled (1).
sip changed voice.aes.hs.enable The default value is enabled (1).
sip added call.directedCallPickupString The star code to initiate a directed call
pickup.