Polycom 1725-31402-001 - Manual (Page 28)

Release Notes - UC Software Changes
Page 20 Copyright © 2011 Polycom, Inc.

61343: Phones now provide a configurable parameter that allows the
verification of the authentication tag to be disabled for received SRTP packets.
The purpose of this is to allow system administrators to resolve defects in
other endpoints where the authentication tag is not computed correctly.
Supported parameter: “sec.srtp.noAuthRxRTP”

61389: [802.1x - EAPOL Logoff] Phone will recycle the LAN link (e.g. it will
bring it down and up in an interval of one second) upon detecting a PC link
down event. This shall force the 802.1X switch to refresh the authorized port
state and start to send "request for identity" challenge messages. The
associated configuration parameter is:
“sec.dot1x.eapollogoff.pcforcelanlinkreset” with values:
"0" - Never recycle LAN link
"1" - Phone will unconditionally recycle the LAN link upon detecting PC
link down event

61861:
Corporate Directory LDAP initialization supports the “bind”
authentication.

62115: SoundPoint IP 320, 321, 330, 331 and 335: Phones now display the full
text str
ings of the “Phone Lock” feature.

62259: Phones now display the Call Forward destination on Idle Display.

62775: VVX 1500: The toolbar slide-out option is now configurable. The
associated configuration parameter is: “mb.main.toolbar.autohide.feature”
“1” - feature is enabled (default)
“0” - feature is disabled. The “Autohide” enable/disable buttons are no longer
visible to the user in the toolbar.
2.3.2 Removed Features
None
2.3.3 Corrections

44337: Configured characters ";", "/", "?", "&", "=", "~", "%", "\" are not
escaped (they are present) in INVITE messages.

55794: SoundStation IP 6000, 7000: Conference phone reboots upon receiving
a call with incorrect SRTCP indices.

56491: SIP 3.2.x: The screen displays the IP address of the server when
disabling the “Call Forwarding” feature using a „#‟ code. The screen displays
“21@ip_address_of_server” when it should display just “21”.

59824: Phone does not change all of the menu option labels into the selected
language.

59843: VVX 1500: The CallerID is incorrectly displayed (displays the ID of
called party instead) during an active call after switching (exchanging) valid
logon credentials between 2 phones.

60015: Phone continues to send RTP media for 2.4 seconds after call is
declined with 603 Decline.