Polycom 1725-31402-001 - Manual (Page 95)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 87

46767: Configuration parameters bg.gray.selection are repeated in sip.cfg

46807: XML API: Ringer volume adjust tone is repeated every 5s in certain play
URI scenarios

46808: BLF: The 2nd and 3rd Expansion Modules may not work when IP601
monitors 47 BLF lines

46812: XML API: SoundStation IP 4000 and SoundStation IP 6000 reboot when
attempting to execute the URI key:line2

46831: Phone locked up with "Reboot initiated" on the display, when it
received corrupted JPEG data.

46843: Using TCP as the transport and BLF line monitoring: An attendant in an
active call cannot perform a directed call pick-up on a remote ringing line.

46858: SoundStation IP 7000 may reboot/freeze if the TRANSFER and CANCEL
soft-keys are pressed in rapid succession.

46861: Call appearance is sometimes missing when a conference is split
during ringback on shared line

46939: Digest Authentication fails on first file in the CONFIG_FILES list with a
certain configuration.

46968: SIP "auth-int" digest authentication mode does not work.

46978: EFK: Configurable soft keys cannot call functions unless at least one
valid efklist entry is present

47083: SoundStation IP 4000: Phone does not send a register request when
parameters qos.ip.rtp.dscp and qos.ip.callControl.dscp are set to a different
value between 0 and 60

47110: SoundStation IP 7000: Enter user password in Advanced menu, phone
goes to Admin menu instead of User menu

47163: 603 Decline sent instead of 486 on DND

47185: In some scenarios, Directed Call-Pickup via BLF drops call and leaves
phone UI in a strange state.

47262: microbrowser URL in configuration file is not recognized if it is
preceded by spaces

47310: Going on-hook on the handset of the BLF attendant during incoming
call to a BLF monitored line initiates a BLF Call-Pickup.

47345: If call.stickyAutoLineSeize=”1”; In some scenarios, initiating a call
whilst a BLF monitored phone is in the Alerting state may cause the phone to
lock-up.

47450: Port 17185 is open, presenting a security risk

47500: If call.stickyAutoLineSeize=”1”; Active call is not placed on hold when
another call is initiated by a BLF/Speed-dial key.

47530: Using a BLF or Speed Dial key for a Transfer operation does not work.