Pentax 555 - Manual (Page 85)

83
Tak
ing Pi
cture
s
4
1
Press ( in Capture mode to switch to
Multiple Exposure mode.
A message will appear on the LCD monitor
informing you that the camera is ready to take
the base image.
Take the base image. When you have taken the
base image, it will appear in transparent form on
the LCD monitor.
2
Aim the camera at your subject and
choose the exposure method with the
four-way controller (
23 ).
S Priority is given to the brighter image.
Q Priority is given to the darker image.
R The average exposure is obtained.
3
Press the shutter release button.
The Instant Review screen will be displayed and you will be asked
whether you want to continue shooting.
If you select [Continue] and press the OK button, the picture you have just
created will be played back enabling you to add another image. The
combined picture will be saved as a new file.
When there are no recorded images
Playing Back Still Pictures 1 p.26
• Multiple exposure is not possible in C F G mode.
• Continuous shooting is not possible in Multiple Exposure mode.
• The LCD monitor cannot be turned off in Multiple Exposure mode.
Base Image Shooting Base Image Shooting Base Image Shooting
198 198 198
11:19 11:19 11:19
10/20/2003 10/20/2003 10/20/2003
Exposure method