Pentax 555 - Manual (Page 25)

23
Gettin
g
Sta
rte
d
1
6
When you have finished the settings, press the OK button
when the clock reaches 00 seconds.
The camera is ready to take a picture.
Press the OK button again after pressing the OK button when the clock
reaches 00 seconds to return to Capture mode when you set date and
time except the initial settings.
• For an accurate time setting, when you have finished the settings, press
the OK button when the clock reaches 00 seconds.
• You can cancel the settings operation and switch to Capture mode by
pressing the MENU / Fn button when the initial settings screen is
displayed. If this is done, the initial settings screen will be displayed next
time you turn the camera on.
• You can change the settings after they have been made. Refer to
“Changing the Date / Time” (p.116).