Pentax 555 - Manual (Page 80)

78
Tak
ing Pi
cture
s
4
E a b c A d F G D C
You can take pictures using the remote control F (optional).
1
Press the ( button in Capture mode
to display i on the LCD monitor.
The self-timer lamp will blink and the camera is
ready to take pictures.
2
Press the shutter release button on the
remote control unit.
The self-timer lamp will blink rapidly and the
picture will be taken after approximately three seconds.
!Life of the Battery for the Remote Control Unit
A signal can be sent from the remote control unit to the camera approximately
30,000 times. If the battery needs changing, contact your nearest Pentax
customer service center. (A charge is made for replacing the battery.)
Using the Remote Control Unit (optional)
Playing Back Images and Sound 1 p.89
• The buttons on the camera can be used in the same way.
• Please ensure that the remote control unit is no more than 5 meters away
from the front of the camera.
• The distance at which the remote control unit operates may be reduced
when taking pictures against the light.
• Press the ( button in step 1 to display h on the LCD monitor to take a
picture immediately after pressing the shutter release button on the
remote control unit.
1
2
198 198 198
11:19 11:19 11:19
10/20/2003 10/20/2003 10/20/2003