Philips M3860A - Manual (Page 74)

M3860A/M3861A HEARTSTART FR2+
B-6
P
h
ili
ps
Me
dic
a
l
Sy
s
tem
s
Accessories Specifications
M3863A FR2 standard battery
Controls On/Off button
Shock button
Option buttons
LED Indicators Connector socket LED, flashes to indicate socket location. LED is covered when
defibrillator pad connector is properly inserted. Shock button LED flashes when
defibrillator is armed.
Audio Speaker Provides voice prompts (volume is adjustable via Setup screen).
Beeper Chirps when a selftest has failed.
Provides various warning beeps during normal use.
Status Indicator Status indicator LCD displays device readiness for use.
Low Battery Detection Automatic during daily periodic selftesting.
Low Battery Indicator Solid or flashing red X Status Indicator on front panel; screen display LOW
BATTERY or REPLACE BATTERY warning, as appropriate.
category nominal specifications
category nominal specifications
Battery Type 12 VDC, 4.2 Ah, lithium manganese dioxide. Disposable, long-life primary cell.
Capacity When new, a minimum of 300 shocks or 12 hours of operating time at 77° F
(25° C).
Shelf Life
(prior to installation) Typically, 5 years from date of manufacture when stored under standby
environmental conditions in original packaging.
Standby Life
(after installation) Typically, 5 years. >4 years when stored under standby environmental conditions
(battery installed, FR2+ unused).
Status Indicators Good battery: flashing black hourglass on the front panel of the FR2+.
Low battery: flashing red X on the front panel of the FR2+.
Dead battery: solid red X on the front panel of the FR2+.
Storage Temperature 32° to 109° F (0° to 43° C).