Philips M3860A - Manual (Page 2)

P
h
ilip
s
Med
ical Sys
tem
s
The HeartStart FR2+ Defibrillator
Clockwise from top right.
Battery. Standard long-life or
rechargeable battery used to power the
FR2+. (Check local regulations for
disposal and recycling requirements.)
On/Off button. Turns on the
FR2+ and starts voice and screen
prompts. Second press turns off the
FR2+.
Status Indicator. Shows you the
readiness status of the FR2+.
Display screen. Displays text
prompts and incident data. The FR2+
M3860A screen also displays the
patient’s ECG.
Option buttons. Adjust the
contrast of the screen display and
control special functions.
Beeper port. Broadcasts alert
beeps when required. It is located under
the right edge of the FR2+.
Infrared (IR) communications
port. A special lens, or “eye,” used to
transfer data directly to or from another
device.
Data card port. Receptacle for
data card tray.
Data card (optional). Used to
store and review information about an
incident, including ECG and optional
voice recording.
Data card tray. Special sleeve that
holds the data card and fits into the data
card port to help seal the FR2+ against
fluids. The tray should be kept installed
in the FR2+ even if no data card is
used.
Microphone. Used optionally to
record surrounding audio during an
incident. It is located under the right
edge of the FR2+.
Shock button. Controls shock
delivery. The button flashes when the
HeartStart FR2+ is ready to deliver a
shock.
Speaker. Amplifies voice prompts
during use of the FR2+.
Pads placement diagram.
Illustrates correct placement of pads.
Diagrams are also shown on the
defibrillator pads.
Defibrillator pads connector
socket. Receptacle for connector of the
defibrillator pads cable. An adjacent LED
light flashes to show socket location and
is covered when connector is inserted.
Adult defibrillator pads. Self-
adhesive pads with attached cable and
connector.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P